New ESP32-S3 development board is now available → /products
OceanLabz
Login
ESP32-S3TFT 1.8"📷 OV2640ESP32-S3 Dev Board⚡ Web Serial Ready

ESP32-S3 Camera with 1.8 inc TFT Display

XiaoZhi AI is an open-source firmware that turns an ESP32 into a powerful cloud-connected AI voice assistant with real-time speech recognition, natural language understanding, and...

Source: OceanLabz Lab Archive•Target Microcontroller: ESP32-S3•Display: TFT 1.8"
One-Click Web Serial Installer
Manifest: manifest-esp32s3-cam-xiaozhi-ov2640.json

Flash Firmware Directly from Browser

Connect your ESP32-S3 Camera with 1.8 inc TFT Display board to your computer using a USB data cable. Click the button below to pair with your serial port and flash the official AI Xiaozhi firmware in seconds.

⚠️ Your browser does not support Web Serial. Please open this page in Google Chrome, Microsoft Edge, or Opera on desktop to flash firmware directly.
View Raw Manifest
Requires USB Data CableCP2102 / CH340 Driver (if needed)Zero IDE Installation Needed

Hardware Checklist

  • ✓Microcontroller: ESP32-S3 Development Board
  • ✓Display: TFT 1.8" Module (I2C / SPI)
  • ✓Microphone: INMP441 Omnidirectional I2S Mic
  • ✓Audio Output: MAX98357A I2S DAC Amplifier + Speaker
  • ✓Camera Module: OV2640 Sensor
  • ✓Connection: USB Type-C Data Cable (for power & flashing)

Video Walkthrough

YouTube

Watch step-by-step assembly, pairing with the Xiaozhi platform, and live voice interactions.

Step-by-Step Hardware & Setup Guide

Follow the wiring connections, component details, Wi-Fi pairing instructions, and voice commands below.

What is XiaoZhi AI

XiaoZhi AI is an open-source firmware that turns an ESP32 into a powerful cloud-connected AI voice assistant with real-time speech recognition, natural language understanding, and text-to-speech using the xiaozhi.me platform.

Required Components

Component Description Qty
ESP32 S3 Camera Board AI Camera Dev Board 1
INMP441 I2S Mic Digital I2S microphone 1
MAX98357A Amp I2S audio amplifier 1
2W 4Ω Speaker Any available speaker up to 16Ω. 1
1.8 TFT Display (SPI) 128x160 Shows pairing code, images, animations 1
Breadboard & Wires For prototyping As required
⚠️ Recommended: Use a zero/DOT PCB and solder all wires properly instead of a breadboard. Breadboard connections can become loose and unstable during movement, which may cause disconnections or errors.

Circuit Connections

🎤 INMP441 Mic
VDD → 3.3V
GND → GND
L/R → GND
SD → GPIO42
WS → GPIO1
SCK → GPIO2
🔊 MAX98357A Amp
VIN → 5V
GND → GND
LRC → GPIO41
DIN → GPIO39
GAIN → GND
BCLK → GPIO40
📺 TFT Display
VCC → 5V
GND → GND
BL → GPIO38
CLK → GPIO19
DIN → GPIO20
D/C → GPIO47
CS → GPIO45
RST → GPIO21
⚠️ Double-check all connections before powering on!

Flash Firmware (Browser-Based)

No Arduino IDE required — flash directly from your browser using Web Serial.

  1. Click "CONNECT" below
  2. Hold BOOT button on ESP32 S3 and connect USB
  3. Select the ESP32 S3 port and click Connect
  4. Choose "Install OceanLabz ESP32S3 TFT CAM" and click Install
  5. Wait 2 minutes for completion
ESP32S3 OV2640 CAM
ESP32S3 OV3660 CAM
ESP32S3 OV5640 CAM
🛒 Buy This ESP32-S3 Camera Board

Wi-Fi Configuration

After flashing, the ESP32 creates a hotspot named Xiaozhi-XXXX.

  1. Connect to this Wi-Fi (no password)
  2. Open 192.168.4.1 in browser
  3. Select your home 2.4GHz Wi-Fi and enter password
  4. Device will restart and connect to your network
⚠️ ESP32 only supports 2.4GHz networks. Use a data-capable USB cable.

Create Account & Pair

1
Reconnect to your home Wi-Fi (exit the XiaoZhi hotspot).
2
Open xiaozhi.me and click on "Console".
3
Create a free account using Google Sign-Up (fastest method).

Pair Your ESP32 S3

1
Click "+ Add Device" in the console dashboard.
2
Read the 6-digit code scrolling on the TFT display.
3
Enter the code and click Confirm to link your device.
4
Accept the agreement and click "Start Using", then select Open Source (Free).
⚠️ The code refreshes quickly — enter it as soon as it appears.
Device Paired Successfully!
Your ESP32 S3 is now connected and visible in the console dashboard.

Most Powerful Features & Voice Commands

📷 Capture image using ESP32-CAM
🧠 Send image to AI for analysis
🔊 Set volume to 50%
☀️ Increase brightness
🌧️ Check weather status
🎵 Play music
😉 Tell me a joke
📊 Get instant AI response
🎤 Press BOOT to activate
Auto-sleep after silence — press BOOT again to wake.

33943 0 0 0 ]]> 2169 0 1973 2187 0 0 2334 0 0 2398 0 0 2477 0 0 2486 https://www.youtube.com/@PR-sn3mz/ 0 0 2694 0 0 2772 https://xxxporn2022.com BEST ANAL PORN SITE]]> 0 0 2996 0 0